Mosquito. Proven Technology, designed with
safety in mind
The Mosquito is designed for external use only and has a range of 20
- 25 metres with a 60° angle of spread.
Mosquito operates on a 12vDC safe voltage supplied by a dedicated power
supply unit. One of these is available with provision for battery back-up
so that a unit will function even during power cuts. Mosquito can also
be triggered by any external PIR (passive infra red) detector, or infra-red
beam, sited to detect youths in sheltered areas at the rear of premises
or in stairwalls. A radio remote control fob system is also available.
Due to the nature of high frequency sound, there is no noise penetration
through solid objects, therefore sound will not be heard within the premises
where mounted, or any adjoining properties.
 |
Part
No |
Description |
MSQ2 |
Mosquito2 Unit |
MSQCQ |
Vandal-resistant, protective metal cage |
AXPTU |
Plug-top power supply unit with 13A Plug |
AXPSU |
Boxed 230vAC/12vDC power supply unit (Battery
now supplied) |
MSQBKT |
Fixed angle mounting bracket |
762rEUR-00 |
Dual-Channel radio receiver
(needs an AXPTU or an AXPSU) |
722rEUR-00 |
4-button remote control radio fob transmitter |
|
Mosquito Specifications :
Voltage
12Vdc
Tones
Single tone above 16KHz
Sound Output
High and low setting with automatic ambient compensation
Compensation
Output is automatically increased to be 4 to 8dB above the ambient,
up to the maximum for each setting
Operation
Setting 1 - Tone operates for 20 mins then silences and awaits
retrigger
Setting 2 - Tone operates continuously until switched off
Activation
Mode 1 - Alarm operates at power on
Mode 2 - Alarm operates in response to external trigger (PIR etc.)
Mode 3 - Alarm operates in response to built-in vox switch (noise activation)
Protection
Vandal and weather resistant IP65 enclosure suitable for external
use
Temperature
-20°C to +70°C
Material
Diecast zinc alloy and steel
Mounting
Wall mounting, angle bracket available
Colour
Grey
|